CNC centres
3
5-axis machines
High-precision CNC machining · Made in Austria
Complex components. Highest precision.
Your partner for demanding 5-axis simultaneous machining and turn-mill complete machining – for prototypes, small and medium series. Built on the technological foundation of In-Vision Technologies AG.
Workholding fixtures
111
95 soft jaws + 16 steel jaws
Material
20
tonnes of aluminium / year
Part volume
20,000
parts / year
Core competencies
Why your parts are in good hands with us
State-of-the-art machines, deep process expertise and maximum flexibility – all from a single source.
5-axis simultaneous machining at the highest level
With the DMG-MORI DMU 50 and the MAZAK INTEGREX, we machine highly complex geometries in a single set-up – no re-clamping error, maximum dimensional accuracy, even at the tightest tolerances.
Shorter lead times through complete machining
The INTEGREX combines turning, milling and drilling in one cycle. Less transport, less waiting time – your parts reach you faster and with greater accuracy.
Modular clamping technology for maximum flexibility
Our Zero Clamp system enables set-up changes in minutes. With 111 customer-specific fixtures, we are prepared for almost any component geometry – without any special investment on your part.
Broad materials expertise – from aluminium to non-ferrous metals
From high-strength AW-7075 through stainless steel to brass and bronze – we have the expertise and the optimum cutting parameters for your material, even for difficult-to-machine alloys.
Machine park
State-of-the-art CNC technology
Three cutting-edge machining centres.
5-axis milling centre
DMG-MORI DMU 50 (3rd Gen)
X/Y/Z travel
650 / 520 / 475 mm
clamping surface
Ø 630 × 500 mm
spindle speed
up to 20,000 min⁻¹
spindle
speedMASTER® SK 40
tool magazine
30 pockets
complex geometries · Zero Clamp
turn-mill centre · multi-function
MAZAK INTEGREX i-450H ST
max. turning diameter
420 mm
centre distance
1.500 mm
bar capacity
112 mm
milling spindle (B-axis)
12.000 min⁻¹
tool magazine
74 stations
complete machining · 5-axis simultaneous
CNC turn-mill centre
DMG-MORI NLX 2500SY
Max. turning diameter
280 mm
Distance between centres
700 mm
Bar capacity
82 mm
Driven tools
up to 10,000 min⁻¹
Y-axis
± 50 mm
Series production · Y-axis
Clamping technology
Set-up advantages & flexibility
Maximum flexibility with minimal secondary time through modular clamping systems.
Zero-point clamping system Zero Clamp
Base plate 4 (square)
396×396×54 mm
Base plate 2 (rectangular)
446×196×54 mm
Triple console
Ø 425×160 mm
Angle console
360×160×250 mm
Repeatability
< 0.002 mm
Hydraulic and centric clamping chucks
XPENT 5-axis type 1
40 kN · up to 386 mm
TITAN 2 125M (2×)
40 kN · up to 313 mm
Centric chuck 120 (6×)
25.5 kN · up to 182 mm
Fixtures total
111 units
Max. part size DMU
450 × 300 mm
Materials
Materials expertise
Broad materials spectrum with deep process expertise – from aluminium to non-ferrous metals.
Aluminium alloys
- AW-7075 (hochfest, Luftfahrt)
- AW-5083 (seewasserbeständig)
- AW-6026LF (hohe Festigkeit, Automotive)
Steel & stainless steel
- Baustahl (S235, S355)
- Vergütungsstahl (42CrMo4)
- Edelstahl (1.4301, 1.4404)
- Werkzeugstahl
Non-ferrous metals
- Messing (CuZn)
- Kupfer (Cu-ETP)
- Bronze (CuSn)
Quality assurance
In-process inspection & complete documentation
Quality is no accident – with us, it is process.
In-process dimensional inspection
Component inspection directly next to the machine – short distances to the metrology lab
Repeatability through Zero Clamp
High-precision positioning with every set-up change, < 0.002 mm
Tolerance capability through 5-axis simultaneous machining
Complex fits in a single set-up – no re-clamping error
Manufacturing documentation on request
Inspection reports, material certificates and full traceability
Sample and prototype production
Fast first-article parts for your approval before series start, including documentation
FAQ's
Frequently Asked Questions
Which CAD files are accepted?
We can accept neutral formats such as STEP and IGES, as well as CAD formats from SolidWorks, Inventor, CATIA and Creo.
Which materials can be machined?
We process a broad range of materials, with particular focus on:
Aluminium alloys: AW-7075 (high-strength), AW-5083, AW-6026.
Steel & stainless steel: various grades for machine and tool construction.
Non-ferrous metals: brass, copper and bronze.
Do you also manufacture individual parts?
Yes, we are also happy to produce individual pieces.
Which workpiece sizes can be processed?
In milling, we work up to a maximum of 450x300x310mm, and in turning up to DM300x350mm.
What lead times can be expected?
Lead time naturally depends heavily on current capacity utilisation. On average, please allow 4 - 6 weeks.
Which machines are available?
CNC milling: DMG-MORI DMU 50 (3rd Generation)
CNC turn-mill centre: MAZAK INTEGREX i-450H ST
CNC turning technology: DMG-MORI NLX 2500SY
Which surface treatments are possible?
We primarily offer anodising and plasma coating through external partners.
Ready for your next project?
Send us your drawing or describe your component – we will provide you with a non-binding quotation within 24 hours.
📞 +43 664 91 91 946
✉ office@in-vision.at
🌐 www.in-vision.at
📍 Industriestrasse 9, 2353 Guntramsdorf, Austria
Florian Posseth
Head of Operations